Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastron G100.A85.N - TPS - Elastron Kimya A.S.

Material Data Center offers the following functions for Elastron G100.A85.N:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Elastron G datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Caractéristiques des transformations/physiquesValeurUnitéNorme du test
ASTM Data
Retrait au moulage , parallèle 0.0158 mm/mm ASTM D 955
Retrait au moulage, perpendiculaire 0.0123 mm/mm ASTM D 955
Propriétés mécaniquesValeurUnitéNorme du test
ASTM Data
Résistance de traction à la rupture 8 MPa ASTM D 638
Allongement à la rupture 700 % ASTM D 638
Module à 100% allongement 3.3 MPa ASTM D 412
Module à 300% allongement 4.5 MPa ASTM D 412
Dureté A Shore 85 - ASTM D 2240
Résistance au déchirement 53 kN/m ASTM D 624
Compression rémanente, 22 hr @ 73 °F 26 % ASTM D 395
Compression rémanente, 22 hr @ 158 °F 60 % ASTM D 395
Propriétés diversesValeurUnitéNorme du test
Densité 1160 kg/m³ ASTM D 792
Caractéristiques
Transformation
Moulage par injection
Conditionnement
Couleurs naturelles
Caractéristiques
Soft Feel
Résistance Chimique
Résistance chimique générale, Résistance à l’ozone
Disponibilité régionale
Europe
Conditions générales
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.